Latest activity

It's definitely not deck build-up. It is also definitely not blade wear since it happened with two sets of brand new blades. And it has...

My cheap neighbor bought 1 of these weed eaters out of a pawnshop.Surprised they even had 1 in it's condition.Leaking fuel so it won't...

Came here to say the same thing. Not that I've ever even heard of a toothed "timing belt" on a mower deck that would allow for such...

You do realize that Ferris IS2600 with a 61" Deck uses three 21" which 3 are 63" so you have up to a half an inch overlap between the...

What was your leak down test gauge showing? I ask because you cannot always trust what the dip stick fill tube is indicating. Was this...

Did a leakdown test and massive air from distick

How did you determine bad rings? Are the cylinder scored?

How did you determine bad rings? Are the cylinder scored?

Thanks

Hi Phillybo, The manuals do not give the exact design specification for the installed height of the valve guides. If this head has a...

Guess guides were good. Should have did leakdown first. Bad rings. Massive air from oil dipstick

manual say replace head if it overheats and damages guides. Ne factory kit per head is $200 - $220. What is your time worth? Or lets say...

Thanks!

Just a couple of thoughts. 1) as stated above, mow at full throttle. 2) don't cut while turning, do three point turns. 3) check deck for...