Latest activity

JD Repair Manual says wire size is .8 … what does that refer to? Thanks.

Cool - from $30 good used on ebay to $86 from KW. I saw the price on a crank this morning about $50 so that is a bargain on a 20 year...

I had read about the problem with FERRIS that starts ok but stalls when the hand brake is released. Quite a few remedies were suggested...

I was having trouble with my 50" White (Yardman by a different name). A continuously variable speed machine, not hydraulic. It used to...

Unless the blades are gear drive or clocked with a timing belt the blades will not stay clocked and will collide

You mean "premium" as in price? Well, if you're using less per gallon of gas, but you'd need 2x+ as much of the other stuff....is the...

Hello thank you very much I will try that tomorrow. Jim

Item 957 https://www.partstree.com/models/104m02-0010-f1-briggs-stratton-vertical-engine/exhaust-system-fuel-supply-7/ part number...

Check out the John Deere freedom mulching deck. It has the toothed timing belt.

Unless the blades are gear drive or clocked with a timing belt the blades will not stay clocked and will collide

Not worth the time and money normally to replace bent crankshaft on a Honda Gcv160 or 190. Do your best to straighten it if possible.

Look at Steve's small engine repair on YT. He recently showed alleviating a bent crank. Not a full fix, but made it workable and...

That 'll do it. Bend the crank. Vibe city.

Crankshaft is bent, a couple of my kids cut the grass with this, nobody will admit to hitting something, but it obviously happened...

I guess it's too hard to fire it up in idle and when "surging" and place both thumbs over the holes and see if it smooths out...