Latest activity

They are not that failure prone unless it has been run with a dead/bad battery for a very long time. The charging system on these are...

any idea where i can find the phony clip that goes onto the rod?

slomo… Sorry, I wasn’t ignoring you. I should’ve quoted you in my previous post to acknowledge. I think I have tried everything that...

What an amazing reply with great detail

If not you first succeed, try, try again and again and again.... That free returns thing must be intoxicating.

Ordered a new set of wheels and spindles off AMZ. Should be in on Sunday so we'll see.

Kenbu, THX! That will certainly come in handy in the future! Appreciate it.

Parts diagrams and numbers here...

They are not that failure prone unless it has been run with a dead/bad battery for a very long time. The charging system on these are...

yes it is at least 30 years old. The piston and rings as well as the cast iron cylinder sleeve look great. I have not pulled the...

Helo Phillybo, Have you compared it to the other head to verify what is going on? Often times a pushrod get bent on these when the...

"Necessity is the mother of invention" (Plato) That looks pretty interesting, but it works and that's what counts Now you need to take...

Product ID number and serial number is needed. This is not a machine you just start bypassing thing on blindly experimenting. Is this a...

Pic

I did it, made a plug from a connector block, used a wire to complete the connection loop. Charging at 14.5V. Saved $68. Cost $9.