Latest activity

Sorry, did not include photo

It is hard to beat a Scag.

Very rarely do Welch plugs fall out. Replace, slightly peen, and hit it with fingernail polish and you are set.

I like to put fingernail polish over it

I am working on a Cub 1330 where the person put the arm that has the idler wheel for the belt tensioner for the mower drive belt in the...

Blade difference , deck design as mentioned , blade speed etc . and probably several more reasons can be possible for that symptom . A...

The blade can be balanced that way i i r in Denver .

Just being pedantic; Weight is but one factor in blade balance. The other factors are "tracking" & weight distribution (base to tip)...

Back when I was teaching, ran into this problem on a wide variety of engines. Made about a half dozen what I call oil troughs. Here’s...

All way too complicated - I use a piece of malleable aluminium flashing (replaced lead). Can be purchased from the hardware in a small...

They do a FAIR job on dry grass and leaves. However, high lift or OEM blades do a much better job. Remember, mower companies designed...

One more thing, Gator blades make for a horrible cut. If your grass is just a little damp, they will pack the deck with clippings. This...

go mow your yard/lawn and take a good photo showing the mohawking so we can see for ourselves

Some just don't get it that there is only a 1/16 overlap if 72" true cutting width which means the OP has to have prefect blades. Either...

if the blades are not level that can cause air flow disruption and weird cutting issues - Google can be your friend too..... A "lawn...