Latest activity

We need your product label information off of the machine. They have serial number differences and harnesses are usually different among...

That is a good idea, but many mower oil filters are barely accessible, much less drill a hole.

Yes. I'll look into those. Thanks.

@BigBlueEdge Did you see my above reply about the blades that might fit your 72" Bad Boy?

Not my experience. The Gators do a better job on both my X758's 60" deck and my Rogue's. I may well be an outlier though, because on my...

I can start it by jumping the solenoid, so I think it is the seat switch. I would like to test it but I don't have a diagram to verify...

Never spill a drop of oil if the filter is loosened so it can be turned by hand , then a hole is drilled at 12 o'clock in the filter...

Wrenches cause explosions and , i.ve seen 2 men lead a welder to a water hydrant with acidized eyes . i've seen lucky farmers use...

hit a branch while cutting the PTO Clutch stopped working so I took a look and seen two wires free. I could not find out were they went...

Just Joined Today I have a Gravely HD ZT 60

Actually intake pushrod was bent, exhaust pushrod was disconnected.

Uhmmm, I'd guess that softer tires will just cause you to scalp the dickens out of the lawn. Maybe try aerating on a rainy day and then...

I've seen a lead acid car battery blow apart on a cold Winter morning and bend the entire front corner of the hood on a '69 Pontiac...

A basic rule is to never throw away any parts until you are absolutely sure the job is done. Cannot really see anything wrong with the...

Ok here we are . I do not have picture of bent pushrod, already threw it away