Latest activity

I like to put fingernail polish over it

🤣🤣🤣

@BigBlueEdge Did you see my above reply about the blades that might fit your 72" Bad Boy?

After sitting for a year, I decided to work on this some more. I have really dumped a lot of money and my own labor into this mower and...

They do a FAIR job on dry grass and leaves. However, high lift or OEM blades do a much better job. Remember, mower companies designed...

We need the full model and serial number to reference the correct parts catalogues. This is what typically happens when a coil stops...

Here is the audio file: https://jumpshare.com/s/qi2QZkdC9OLszqa7q5iJ Model: 44P777 Hours: 657 Engine is making a concerning noise and...

That hasn't been my experience that Gator blades lead to grass build-up under the deck. I've had Gator blades on my x758 since about...

@StarTech Rotary lists the #6026 as a fit. Maybe a local dealer would let @BigBlueEdge try a set for fit. If they fit without striking...

Some just don't get it that there is only a 1/16 overlap if 72" true cutting width which means the OP has to have prefect blades. Either...

If you ground the positive clamp and you get a crash course in welding.

The engine information is computer dot etched on the flat side section of the engine block; you may need to clean the block really well...

Model number info for the engine is most likely stamped into the side of the engine block on the side opposite the fuel tank and carb.

The blower housing has decal information: "B&S 500E Series"/140cc I could never find a specific model information for just the engine...

I'd blame the Gravely not the blades.... the blades worked great on my Gravely, it was the Gravely which was a POS, hence the JD's.....