Latest activity

Back in 1998 i paid $350 for a commercial stihl FS80 string trimmer. I have 4 acres and have put probably a half dozen tanks of fuel...

Try lookig up Model 944.607232 it should have all the part numbers you need

Solution of baking soda and water will boil the crud out of the cable ends. Just stick the end of the cable in the solution.

If you would give the engine model number, we could verify what starter pn, but since you won't, try this info. Just the gear is...

Hello VPF, Most shop newer small engine shop techs have never worked on the older rear engine riders, so that would be a waste of time...

I've got a Gravely HD ZT 60" that throws leaves rather than cut 'em. So I purchased a mulching kit. Works great but it's a real pain for...

Back in 1998 i paid $350 for a commercial stihl FS80 string trimmer. I have 4 acres and have put probably a half dozen tanks of fuel...

Get rid of the "decompression system". The oil viscosity has nothing to do with your problem.

Not round

From your description, it needs the valves adjusted so the compression release will work. If it still fights the compression after...

YouTube Taryl Fixes all he recently did a video on a mow that was doing that ….

Swapping decks is usually not that easy. You won’t know until you try.

Are you able to correctly adjust valves? I ask because you asked what is spec on valves for this engine. It is simply a matter of...

Sorry it is on a CH not a CV. It runs fine for a while and then just dies. It is blowing oil out the little vent filter on the fuel...

if you think you have a blown head gasket, pull it and replace it. If you are pulling the cord on the parts cannon because you don't...