Latest activity

Question(s) - - - 1) how high is the grass when you cut... 2) what is the height setting of your deck... also, someone mention...

for what it's worth, my soil condition is sandy loam, and the deck bearings on my Gravely were burning out about every 3 months or 30...

end of season I try to remember to fog all my engines much like a marine engine.....

how about putting the blame on the real party responsible for the trash, the slob who threw it out their window..... the grass will blow...

The pinion and rack gear need to be replaced most likely. The deck has to be removed, and the mower raised up enough for access to the...

What’s considered a normal compression reading? Thought I’d screw a gauge into the spark plug hole instead of placing my finger over the...

You stored it without any gas, but did you run the fuel completely out of the carburetor as you stored it?

Common sense tells me that grease is good for rapidly spinning parts, and no grease is bad. I think people tend to overthink situations...

If this is the setup I think it is Snapper has a very similar mower and the swivel fitting for the hydraulic hose going to the cylinder...

Hello all, First of all, thank you very much for sharing & helping each others so much - it is always nice to see people trying to help...

I ride a Harley trike but cans and glass in the road are not good for any tires. Grass clippings are usually harmless for me. The guys...

Sounds like rust got into the nuts on the hose fittings. Usually one end is crimped solid, but the other should be able to turn on the...

You might contact Jack's small engine and talk to them to see if they can find you a used one.

Can you provide the product label information for the Toro you have. If it is a bagger model, the label will be under a bagger door at...

The pinion and rack gear need to be replaced most likely. The deck has to be removed, and the mower raised up enough for access to the...