Latest activity

Sounds like a shorted PTO clutch winding or a harness rub through on the wires leading to the PTO clutch.

Solved it! Long story shortened, all it needed was the 3 clutch adjustment bolts tightened. How I got there... Reassembled and...

Solved it! Long story shortened, all it needed was the 3 clutch adjustment bolts tightened. How I got there... Reassembled and...

I have that manual...but they are not specific on the bushings...it just says install lower e-clip

Good afternoon I have a Ariens 1028 fuse keeps blowing on the PTO if you switch it with the key on but not the engine running. The...

It is a 40H777-0871-B1 CODE: 080617YG

Thank you. I'm not certain a new spark plug counts as "shot gunning" parts but I really appreciate your comments. Whatever occurred...

Thank you, but that takes me to the power portal.I don't have any access to

hlw49, Can't access power portal without a username and password. They don't allow cut and paste of their highly sensitive classified...

Check to make sure you put the gov rod in the correct hole.

Hello ACF, What is the PIN on the white sticker on the machine? What are the numbers the engine label or stamped into the top of one of...

i've spent pretty much the whole day trying to get the nut end of the HOC for the new bearing undone.......penetrating oil...

Well the round orange or black seals are used with plastic intake manifolds and the cardboard / paper type are used with metal type...

Hello shre74, The stamped numbers off the valve cover would help greatly to know which 22 HP B&S you are working on. I think the...