Latest activity

We are talking about the cost difference of a few bucks a tube of regular cheap grease versus better quality red and tacky grease. I...

Here is Project Farms comparison between Supertech and Lucas Red n Tacky Just got 3 cases of Lucas Red n Tacky delivered today.

I have been given mixed signals on the right grease to use. I guess I need to order the stuff that Scag recommends in the manual.

Red and tacky is a #2 NGLI grease. And is recommended for high speed and wheel bearings.

Do you know what the red grease is for? It is a "sticky" version of grease. Red = sticky. As in it doesn't flow. As in it doesn't move...

Hi ACF, Yep, I read that. 12V going to it does not mean it is working physically. I've had many that even "click" but would not open...

I would take a look at the deck belt mechanism. If you cannot move it far enough to engage fully, so that the blade brake releases...

The 954-04060 is 1/2 x 96.5 not 1/2 x 95.5. And BTW I have a 200" V-belt measuring tool in my shop but most don't. Not even the local...

I'll up you a hematoma in my arm where bypass surgery was a month ago. Spent most of the night at the ER. Busted spindle sounds like a...

OEM belt fixed the problem. Then I went and busted a spindle. It never ends ;)

I got lucky and found the service manual. On the FS600V, set up for recoil start, there is a stator under the flywheel and it appears...

You’ve posted 2 threads with the same problem and have done what experienced techs never do, THROW PARTS AT IT TO SEE WHAT STICKS. As...

One thing I failed to mention here is the larger idler pulley from way back when I'm sure it's still good but in any case I replace the...

Hello I have an lt2000 19.5 horsepower hp Craftsman. The mower deck is a 42-in cutting with deck. For more than a month I've had the...

A better image of the destroyed belt