Latest activity

You have a short on this circuit. Find out why and where on said circuit. Wires rubbing, mice chewing....... Call JD and ask for a...

Reporting back for future HRZ216 owners with similar issues that find this thread. Happy to report I figured out the issue. The problem...

Go with the genuine B&S, forget the cheap knockoff ones.

I have a brand new, old stock Simplicity Courier Zero Turn that won't start. Mowed yesterday for about 4 hours, refilled the tank and...

I had some backfiring (years back) with a Honda walk behind mower. Checked the valve clearances and found them out of spec...

Kenbu: Surely you jest! Option 1: What do you mean read the book and understand how the systems work? I am the all-knowing king/Queen...

The lift arms do have other holes, but they would lower not raise the deck. Guess I will just live with cutting grass at 3 Inches...

Glad you got it figured out.

It can be towed or pushed with the engine and brake off, but it will resist it. The fluid in the hydrostatic transmission will bypass...

There should be retainer ring holding the bearing hoc in place. This service manual should help you out. https://www.toro.com/getpub/22446

Check and see if you have a burnt Exhaust Valve or possible Lazy Valve spring!!

Apologies......I see now that the nut is actually the end of the retainer bushing for the bearing....at least I think so?

If your serial number falls in the range I would try to get it replaced if they will replace it. You’ll get a brand new one and you did...

Just a quick question....have the new bearing for this toro 20374 rear left wheel, and wondering if the large nut on the inside of the...

A bad pto switch can be the problem or a broken wire end inside the pto switch harness. Look closely at each gold color wire end foe a...