Latest activity

Can't deal with the internal spacer till I tear one down again. Meanwhile, I'm going to use a plug in the weep hole and see if that is...

Hi Paul, Sounds like you are describing the governor on the engine reacting to a carburetor issue. The carburetor likely needs to be...

Good point.

Get it straightened and welded before it gets worse. It is basically helps hold the clippings under the deck longer so it mulches them...

Broken baffle that helps maintain the proper vacuum to cut the grass correctly. I have fixed 2 or 3 already this year. It catches on...

only if you want it to work like the Engineers designed it.

0230 could be mice chewing wires to the pump or wear as Auto Doc's said. Make sure you have battery voltage and a good ground here. 0174...

Lucas red is all thickeners. Hardly any oil dropped out at 400F in the video. Thickeners do not lubricate. All they do is thicken. So...

That sounds like the familiar problem with the fuel pickup tube getting debris caught in it at the fuel line connection point. The tube...

Thanks, I’m in the process of changing all the hoses. If I’m lucky I’ll have an extra pump for when it really goes bad. I looked at the...

This might help you identify the regulator you are looking for...

Looks like the standard 5/9 Briggs voltage regulator used on single cylinder Intek from 10-21 hp engines.

You are looking at it like since the Lucas didn't move it isn't providing lubrication. I see it as the Supertech is no longer lubing...

https://www.ebay.com/itm/135089505864?chn=ps&norover=1&mkevt=1&mkrid=711-167538-502585-0&mkcid=2&mkscid=101&itemid=135089505864&targetid=...

I do the same. A guy that swapped in new starters for customers gave me a big pile of starters sometime back and I've reconditioned...