Latest activity

17.5 horsepower Briggs& Stratton engine

Thanks for getting back to me on that and additionally I can say I think it's a yard machine so it's a twin cylinder .5 horsepower 42 in...

Like Fish,I agree.Check the linkage,but send a pic.Someone may see the problem.

If you are the same guy as on the other site, put up some pics of the linkages and carb area.

You would be correct in your observation. The shorter thread reach would have been correct for the flat head application.

OK I follow. You are letting the top bearing be able to move up as needed. But the trash shield is pressed in over the bearing. There...

Nice mower well kept

Over the years, I have seen many intakes distorted from overtightening of the mount bolts. These bolts only require light torque and...

That's a no brainer. Stihl. You will never notice the difference in HP and Stihl is a better saw anyway.

The reason i don't press one in is to accommodate the expansion forces when those parts increase in length as they gain temperature ...

Here is what I learned working in a high end machine shop back when I was still building racing engines. Valves seal. Let's say they...

Crap....being stupid has its costs. Thanks! Never once thought the save would have two options. However....just tried and the draft goes...

Back blow the fuel supply line from the tank. These lines collect debris over time and gradually starve the engine for enough ful to...

These often have a (hidden) pencil style filter shoved up into the tank fuel line fitting. That will need to be removed before an inline...