Latest activity

On my Kawasaki engine I had the lower finger 'disappear' on my pushrod guide plate causing a random clank because the pushrod/rocker arm...

Remember, Mom was driving........ Just saying. :D

Always check valves before flywheel key. Rarely is it a sheared flywheel key, but you should be surprised how often something wrong is...

You will have to remove the top plastic cover on the motor. At the flywheel you will see the coil, and underneath it a small "tab" This...

Awesome suggestion! I'll start with that gas cap. Easy enough to do. I did not realize gas caps go bad like that. If it is a bad gas...

Two things to check the next time it happens. As soon as you feel it starts to quit open the gas cap. If it continues to run, your gas...

Two things to check the next time it happens. As soon as you feel it starts to quit open the gas cap. If it continues to run, your gas...

My Bad Boy MZ Magnum runs for about 20 mins then stops. It starts to sputter like it's running out of gas then quits. I have a full tank...

I think those are kept in the hen's teeth drawer of the parts bin. Never had to find one. I did not look closely at the posted image...

Your geometry is correct as far as I can think it through. I'm 77 now, hoping to increase as time goes on, and find the 33" I have...

Most don't know about this mix.....they usually thing it's just some backwoods retard that invented it. They always mention that they...

Hello Snapper 87, I have had the best luck with Acetone and ATF mixed 50/50. The Acetone leads the ATF deep down into the rust. It's...

Thanks for the reply. No help. I think I have watched every video ever recorded on a tb30 and none have this specific issue. I am...

Actually I used my metal detector and found it deep in the grass!!!

I disagree. I used to race karts with 5 HP Briggs flathead engines. I ran open class, and the engines peaked out around 6000 RPM. At the...