Latest activity

Belt number should be Ariens 21547188 V-Belt. Your belt may not have the same angle, which is riding to low in the pulleys.. Also...

That is inaccurate. See attached. Read. The. Label. (Not directed at you personally but, some small % homeowners not reading lawn...

Trust me, I’ve tried em all and there is now ONLY ONE marking dye I will ever use: TurfMark Blue Zero problems using it w any chemicals...

There’s ONLY THREE WAYS I’ve come to trust: word of mouth recommendations and referrals Word of Mouth recommendations WORD OF MOUTH...

There is no way a 1/4” or 1/2” deck belt is making that much difference. Is it a manual blade engagement, or has a PTO switch? Do you...

Front tires should be closer to 20 pounds of pressure, and rear tires closer to 12 psi. Put mower on level concrete and get out your...

Maybe over time and usage, the engine developed just enough play that the starter wasn’t lining up exactly right. Glad you got it fixed...

the starter gear should be spinning when it hits the flywheel. If it is not then you either have an electric problem, battery problem...

You have a short on this circuit. Find out why and where on said circuit. Wires rubbing, mice chewing....... Call JD and ask for a...

Carb needs a thorough cleaning or a little more technical explanation. A carb has two fuel circuits. The idle circuit and the high...

Yes, new Spartan keypad consoles come with a 3 year warranty. I have seen several over the years that either new a new keypad console or...

I don’t have a valve grinder, and surprisingly, most people don’t. Most people don’t even know what valves do, much less how to lap...

the web page says they come with a 3 year warranty. Use it is what I would do.

So your carb has the jet adjust on the front of the carb? If so that screw is for slow idle smooth engine idle adjust. I've seen some...

I will give her a go!@