Latest activity

It’s a Briggs & Stratton. I pulled the mower deck off and the crack seal was laying on top of the drive pulley in one piece. What...

Don't buy anything from the store. Take your used motor oil and an old paint brush. Slather the underside of the deck. Park it on some...

Plugs and coils fire easily in an open atmosphere, that is what often tricks people into thinking the parts are good. Under compression...

Ha Senior. I have used the hose a few times but get soaked just as much as the deck😂😂.

Thank you Slomo I like the idea of the used motor oil. I have two gallons of it now. Sorry about not responding earlier been down with...

Don't confuse metric clearance with imperial clearance. He set the valves at .10 and .15mm which is roughly .004 to .005 inch.

A JD 140 rider had different engines on them. We need the engine numbers off the valve cover if B&S or the white label if it is a...

Cub Cadet does not make the drive motors. Check for a manufacturers label such as Parker. At this age, Ebay might be an option.

Your valve clearance is way off. Only adjust valves when cold. Pull the spark plug so you can turn the engine by hand on the top...

Has the coil been removed and then put back upside down? These coils are directional.

I've got one of these electric trimmers - motor works fine but the tap-to-advance stopped working ages ago. I can find no help online -...

done all of that. It seems to pop on the exhaust side and fart back through the carb. I may try a coil and plug but I am now wondering...

My grandson was mowing lawn and he came in and said the mower quit. I went out and look at it and the deck wis covered in oil and the...

I have the same trouble. 2000 Gold Pro, bad recoil starter. Found a Toro the same. have to drill the rivets. DO you know or have you...

Hello! Can anyone help with a diagnostic procedure to reliably rule out a broken compression release mechanism/pin versus a valve...