Latest activity

The owner/ operator manual usually has the deck adjustment information in it. If you don't have the manual, it will be available online...

I believe the shaking is the result of unbalanced blades. See if they are worn. They make a balancer, enter "lawn mower blade balancer"...

Doug thank you very much,, I was thinking about getting a new belt for it. I can't see what you're talking about but I believe you. I...

According to the number, this is a single cylinder push mower engine. Does it have an auto choke function? Compression release is only...

Well. I already took the rear wheels off as it wasn't unlocking and still isn't, so I took the wheels off to work with it more, but I...

Thanks a bunch. Once you explained what type of engine it is and where to look, I was able to locate a video where valve clearance is...

Looks like the belt has a burnt spot. Making it thinner there. And belts shrink when overheated.

What model number rider? They are not all the same. Is the foot brake/ clutch locked down? At the rear of most riders there will be a...

So. I have a Craftsman Riding mower and its rear differential won't unlock and I need to move it from where it currently is. But the...

Set each valve to .004 inch where feeler gauge just fits with a slight drag between the rocker tip and valve stem. Do this with engine...

This service manual should answer all your questions...

Hi Bartles, John Deere does not build the mowers. they "private label" their lawn equipment from other sources that specialize in those...

Have an older Ariens rider with a Tecumseh OHV 15 model #204009 Can't find valve settings anywhere for this motor And do you set the...

I posted this about blades removal and then engaging the PTO because I could not figure out why the mower deck and the engine has...

Have you checked to make sure there isn't gas in the float making it sink and not stop fuel flow at the float needle. Floats on...