Latest activity

For both coils to fail at the same time is highly unlikely. Usually, a reduction in power is quickly noticed, but not a total shutdown...

So I think I solved the problem. I took everything apart again today to ck ground wires etc. My starter solenoid is a 3 post,(2 bolts...

For both coils to fail at the same time is highly unlikely. Usually, a reduction in power is quickly noticed, but not a total shutdown...

Tried your suggestion re jump pack to solenoid. The jump pack has big clips, I purchased it to jump my 3/4 ton diesel. The clips are...

Would you please explain what you mean by pivot bar? I’ve been working on equipment for over 50 years and have never heard that term on...

I see I no need for the average DIY guy to purchase one of the expensive testers, which he will use as once or twice. I’ve used the...

Ronnie Milsap can see that is no good.

Taryl made a video explaining the coil tester types. He said and I agree, the light bulb type does not give the full picture of coil...

Most likely the blade brakes are worn out but I note that you just replaced the belt so that may be a contributing factor. Before the...

Thank you no welding gear.

Is it okay to use rubber blade belt or is kevlar much better? What is the factory murray lawnmower belt made of? The murray belt says...

Clean the tank like a new one. Fix the carb leaking issue first then do a couple oil changes. As in mow once, dump the oil and mow...

I'd replace them both and keep the old good one as a spare. Or you could choose to run the old and a new one and when one fails just...

Hello everyone. I'm the owner of a new ZTX52 mower that I purchased on 7-3-2025. I have joined the forum to do some research and find...

Maybe this manual will help you diagnose the problem...