Latest activity
-
ILENGINE replied to the thread Engine shakes while engaging blades.Seems like the deck belt is shaking really bad. Check the V pulleys for something stuck in the groove, or check the deck belt for an... -
ILENGINE replied to the thread have snapperpro with a 406577-0139-E1 installed governor problem.Could be that gasket but don't overlook the float valve 698537 and be careful and don't drop the jet out of the white plastic...
-
Sslomo replied to the thread Z425 Fuel Leak.Yes it could leak at anytime. They work just like a toilet flush valve does.
-
Sslomo replied to the thread Z425 Fuel Leak.Do you have any gas pilot lights going in your garage? If so I would get the mower fixed asap. You have a 12 year old mower. Time for...
-
TTEXASCOUNTRYBOY59 replied to the thread have snapperpro with a 406577-0139-E1 installed governor problem.these are some pics
-
-
TTEXASCOUNTRYBOY59 posted the thread have snapperpro with a 406577-0139-E1 installed governor problem in Briggs & Stratton.I got Tom Sawyer'd by a cousin, he ran his mower low on oil and exposed a piston. he paid a "guy" to fix it. this is the engine he put...
-
Ddepawl52 replied to the thread Z425 Fuel Leak.Update: After running fine for 2 months (and mowing a lot of lawn) the same problem resurfaced. I got up this morning and noticed a...
-
JJimP2014 replied to the thread Engine shakes while engaging blades.Forgot to mention there is a "very metally" sound like something is grinding.
-
JJimP2014 replied to the thread Engine shakes while engaging blades.Ilengine, I did check the bolts and they seem fine ( engine mount bolts 4 of them ). The engine is producing white smoke in the intake...
-
ILENGINE reacted to Tiger Small Engine's post in the thread Engine shakes while engaging blades with
Like.
Artificial intelligence gives answers based on what a person has fed the program with information. Artificial intelligence is already... -
Tiger Small Engine replied to the thread Engine shakes while engaging blades.Artificial intelligence gives answers based on what a person has fed the program with information. Artificial intelligence is already... -
Tiger Small Engine reacted to ILENGINE's post in the thread Engine shakes while engaging blades with Like.
It will be find to run the deck without blades, But I would start by making sure the motor mount bolts are tight. only takes 1/8 turn...
-
Tiger Small Engine reacted to ILENGINE's post in the thread Wheels out of alignment, would new spindles help? with Like.
Things to looks at would be the steering sector gear, and bushings. The wheel spindles, the tie rods, The front axle and bushings, and...
-
SI have a T-100 I just bought new a couple months ago. I noticed the other day when I had the front end off the ground the Axle pivot bar...
-
BBoit4866 replied to the thread Experience shared..Great reply. I was fortunate that I found out about the breather issue. I only had one cover bolt that was not tight. Even with 1,300...
