Latest activity

Does anyone read the entire thread before posting? 45 posts and over half keep repeating check connections and battery. Constantly...

I have a Craftsman ZTS6000 that was doing the same thing last season. I see you said in your first post that it would crank when you...

make sure all cables are clean and connections are tight , tighten the screw are bolt that wholes the solenoid on. Try it again , if it...

Any help would be appreciated.. thanks

Won’t get love with a comment like that, you must think the techs here have a crystal ball and have seen everything. Electrical...

954-05022A. just correcting the mistyped number in your post

Does anyone read the entire thread before posting? 45 posts and over half keep repeating check connections and battery. Constantly...

I checked for continuity of the light brown wire from the brake switch to the seat switch. It was good. If I defeat the brake switch...

But the fact it shut off by releasing the brake says the seat switch circuit is what is killing the engine. You’ll have to follow the...

Buy the actual repair manual for your machine and a multimeter and study the information to make logical diagnostic decisions. A vast...

I have a twin brother who knows nothing about anything mechanical. He's the kind of guy who is educated well and can read a procedure...

Thanks for the info. I hate to junk it. Engine has good compression and is in good shape for its age.

There are 2 ground cables, one from engine to frame, one from battery to engine or frame. sandpaper all ground and positive connections.

Unfortunately the seat switch did not fix it. I tried a new switch, even tried a new brake switch, even tho I bench tested ok. I'm stumped.

When was the last time the belt was changed? If it has been three years or more I would start there. While you are doing that you...