Latest activity

Stop it with all the bypass info please. Safety switches are there for a reason. Having said that......... Tape the plunger down on...

Well congratulations on your post....now you know what it feels like!:p On that 1 1/4" wrench....go to the back door and pitch that...

Hope you did the human thing and divulged all pertinent info to the new buyer? Not to start anything but I'm stunned you threw in the...

Just sold it for 1200.

perhaps a video of the issue would help us all get straight. upload it to youtube and copy n paste the link here

Was hoping he would replace them but sure, test what you have.

Well congratulations on your post....now you know what it feels like!:p On that 1 1/4" wrench....go to the back door and pitch that...

A keyed shaft and pulley probably would be better (and no oil leak)

I removed the pulley and found the splines were worn down, so it wasn’t turning the spindle. The nut must have worked loose and oil...

There is a black plastic case where the linkage from the forward/reverse linkage meets the transaxle. Are the plastic parts you mention...

Make a jumper for the safety switch?

Also be sure to blow through fuel to fuel tank with cap off to remove any debris caught in the line or connections.

What is “high hours?”. Does mower have steering dampers on steering arms, and is does one damper need to be replaced? Obviously you need...

Also be sure to blow through fuel to fuel tank with cap off to remove any debris caught in the line or connections.

Typically, this is a clogged fuel tank outlet. Trash in the tank. Could be internally deteriorated fuel lines from tank to carb...