yakman
Forum Newbie
- Joined
- Jun 17, 2021
- Threads
- 1
- Messages
- 1
My yth21k46 mover is not starting. Checked the battery and it's showing 12.8V.
I have 4 position ignition switch. Solenoid red left wire is showing 12.8V when ignition is off, however at any other ignition position voltage is showing 0.27V.
White/black small wires to solenoid are showing 12.8V when starting ignition and 0 in other positions.
So in my understanding the problem is that voltage is dropping at solenoid to 0.27V once I'm trying to switch on ignition.
Any reason for such behaviour?
I have 4 position ignition switch. Solenoid red left wire is showing 12.8V when ignition is off, however at any other ignition position voltage is showing 0.27V.
White/black small wires to solenoid are showing 12.8V when starting ignition and 0 in other positions.
So in my understanding the problem is that voltage is dropping at solenoid to 0.27V once I'm trying to switch on ignition.
Any reason for such behaviour?