Export thread

Yellow o-ring for Kawasaki oil drain valve and dipstick

#1

J

Jimbo54

Does anybody know where I can get the yellow o-rings for the oil drain valve and dipstick for a FX691V-AS26 Kawasaki engine?
I hate to have to pay for a new valve or dipstick housing to just get this high temp o-ring.


#2

R

Rivets

Any good repair shop should be able to get this part for you. https://www.partstree.com/parts/kawasaki-92055-0892/


#3

StarTech

StarTech

Search using PN 92055-0892 for the 15.8mm x 20.6mm x 2.4mm O-ring or just switch to 93125K43 which have a temp range of -40° to 250 F which are the ones Kawasaki used for years. These are $13.77 per pack of 100. vs the $4.99 each that I have seen for Kawasaki ones online but of course I pay a lot less even for those from my distributor.

or you try 9464K27 which are 5/8 x 13/16 x 3/32 which are rate for to 400 F. These will be a slightly tighter fit. These are $10.70 per pack of 50

Both of the alternates are from McMaster-Carr.





#4

J

Jimbo54

Rivets said:
Any good repair shop should be able to get this part for you. https://www.partstree.com/parts/kawasaki-92055-0892/
Click to expand...
Thank you very much!


#5

J

Jimbo54

StarTech said:
Search using PN 92055-0892 for the 15.8mm x 20.6mm x 2.4mm O-ring or just switch to 93125K43 which have a temp range of -40° to 250 F which are the ones Kawasaki used for years. These are $13.77 per pack of 100. vs the $4.99 each that I have seen for Kawasaki ones online but of course I pay a lot less even for those from my distributor.

or you try 9464K27 which are 5/8 x 13/16 x 3/32 which are rate for to 400 F. These will be a slightly tighter fit. These are $10.70 per pack of 50

Both of the alternates are from McMaster-Carr.



Click to expand...
Thanks much!


Footer Links 1

Top