Export thread

Where is this tube suppose to go?

#1

J

jjt

I noticed a small amount of gas leaking from the end of this tube... Is this tube suppose to be connected to something? The engine starts....

This is a Briggs and Stratton Vanguard 18hp motor on a Simplicity Regent.

IMG_0853 (1).JPG

I did see something on the carburetor that looked like it should fit to (see arrow) ...but when I tried to start the engine, gas was from out of the carb into the air filter area (engine didn't start..)

IMG_0861.JPG

I'm a real novice when it comes to engines, so that's for any help you can offer!


#2

S

shiftsuper175607

jjt said:
I noticed a small amount of gas leaking from the end of this tube... Is this tube suppose to be connected to something? The engine starts....

This is a Briggs and Stratton Vanguard 18hp motor on a Simplicity Regent.

View attachment 26827

I did see something on the carburetor that looked like it should fit to (see arrow) ...but when I tried to start the engine, gas was from out of the carb into the air filter area (engine didn't start..)

View attachment 26828

I'm a real novice when it comes to engines, so that's for any help you can offer!
Click to expand...

Where does it come from?


#3

J

jjt

Somewhere below the carb... not sure where/how to explain. If you look at the second pic, follow the tube and you see it goes below the carb.

All tubes are connected to fuel pump, so I know its not that...==.


#4

I

ILENGINE

Looks like a carb vent tube. The other end should be open to the air. The filter in the middle is to prevent dust from entering the carb.


Footer Links 1

Top