I have a Walker MBV MOWER with 18.7 hrs on it. At 10.5 hrs the pto safety switch (n/c) gave out. I replaced it with new from dealer.At 18.7 hrs it gave out again. This switch is made by Indak .The Walker part # 5941. Has anyone had any experience with this make of switch? Are they a poor quality switch or is this an unusual happening ? My dealer will have a new one or me tomorrow.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Walker Mower faulty safety switchs
- Thread starter MBV
- Start date
More options
Export threadThe first two things I would check is to see if the unit is over charging and if there is a frayed wire between the PTO switch and the clutch. Your dealer should be doing this under warranty.
The first two things I would check is to see if the unit is over charging and if there is a frayed wire between the PTO switch and the clutch. Your dealer should be doing this under warranty.
Thanks Rivets !
I see them tomorrow.