You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
#1
navydad2022
Hello , trying to set the gaps clearance on my Snapper rear engine 21A907-0124-E1.Its a 12 hp B&S .set them with engine cold or hot?
#2
StarTech
Cold. And Briggs says do it with the piston 1/4" down pass TDC compression to avoid setting the intake valve on top the ACR action.
ACR = Automatic Compression Release
#3
navydad2022
Cold. And Briggs says do it with the piston 1/4" down pass TDC compression to avoid setting the intake valve on top the ACR action.
ACR = Automatic Compression Release
Is the clearance usually 3 on intake 5 on exhaust
#4
StarTech
