Troy Bilt B&S pressure washer throttle linkage

[Tool_Maker_Tim]

The thing is I will almost bet that the model numbers on this engine are not in a location listed in the attached post. I will bet the numbers are stamped into the side of the block beside the muffler on what would be the right side of the engine, if the valve cover is facing away from the person. And none of the Briggs model number find reference that location.

Good point ILENGINE. I can't tell you how many machines Ithat have looked up, trying to find the location of those numbers, only to discover they are in the stated location EXCEPT for my particular piece of equipment! This is a good starting point though. Thanks for the tip!

 

[ILENGINE]

Good point ILENGINE. I can't tell you how many machines Ithat have looked up, trying to find the location of those numbers, only to discover they are in the stated location EXCEPT for my particular piece of equipment! This is a good starting point though. Thanks for the tip!

Wait until you go looking for the model number on the Briggs XR engines where it is stamped into the mounting flange next to the oil drain plug and the engine is mounted to a piece of equipment that required either a mirror, or a borescope to get down into the crevice to read the numbers that are covered in oil.