Export thread

I have a 2004 52"advantage scag 18 hp kohler walk behind I live in ct. and mow 3/4 acre on the average once a week from may to sept. I've replaced the pto clutch three times in them 10 yrs. every time it is the electrical parts that go not the disks . I have checked the voltage output and it is 13.5 to14 volts I do the recommended burn in any suggestions emo

Fixing Electric Clutches

https://www.youtube.com/watch?v=aN2Q9G3Wq-M

403 Forbidden click anyway

Are you using oem clutches?

mechanic mark said:

Fixing Electric Clutches

https://www.youtube.com/watch?v=aN2Q9G3Wq-M

403 Forbidden click anyway

Are you using oem clutches?

Click to expand...

I am using ogura clutch from a scag dealer emo

mechanic mark said:

Fixing Electric Clutches

https://www.youtube.com/watch?v=aN2Q9G3Wq-M

403 Forbidden click anyway

Are you using oem clutches?

Click to expand...

I am using ogura clutches from a scag dealer emo

emo said:

I am using ogura clutches from a scag dealer emo

Click to expand...

Question: Do you use water to clean machine after mowing?
If you are hosing machine down after mowing that's your problem, use leaf blower. Also hands on inspect all wiring and connections for corrosion, loose connections, bare wires, wires hanging loose, use tie straps, & check all ground cables and straps making sure they're tight and secure.

mechanic mark said:

Question: Do you use water to clean machine after mowing?
If you are hosing machine down after mowing that's your problem, use leaf blower. Also hands on inspect all wiring and connections for corrosion, loose connections, bare wires, wires hanging loose, use tie straps, & check all ground cables and straps making sure they're tight and secure.

Click to expand...

no I don't I use air compressor emo