Export thread

Throttle Lever assembly help and details

#1

C

Calvin65

I have a Cub Cadet 1000 series with a Kohler Command CV730 that i replaced head gaskets on. Only problem is throttle cable is not moving the governor lever. Not sure I have Springs in proper linkage holes. Cannot find assembly drawing that shows where they go. Any help would be appreciated


#2

R

Rivets

Section on carb & governor in this manual may help you out. https://www.mymowerparts.com/pdf/Ko...d-CV17-CV18-CV20-CV22-CV25-CV22-CV23-CV26.pdf


#3

C

Calvin65

Rivets said:
Section on carb & governor in this manual may help you out. https://www.mymowerparts.com/pdf/Ko...d-CV17-CV18-CV20-CV22-CV25-CV22-CV23-CV26.pdf. Manual not showing what o need. Governor shaft not moving either CE or CCW
Click to expand...


Footer Links 1

Top