Export thread

Throttle assembly

#1

R

RJH

I had to replace my drive belt on a 07 LT1045 in the process I broke the bolt off as Cub Cadet in assembling the mower used alot of red locktite on the bolt. I had to take the motor off to take it to a machine shop to get the broken bolt out. Yhat is done but I am having trouble reassebling the throttle assembly. Can some one help as to how the throttle cable attaches.


#2

EngineMan

EngineMan

Not sure if this will help you out...

B is where the cable goes from the throttle cable.
F goes to throttle on the carb.

Attachments


  • kohler courage.bmp
    2.4 MB · Views: 17


#3

R

RJH

Thanks for the feedback. The throttle assembly I have looks a little different but also very simular. Looking at the assembly I see where the cable goes to the governor but can't figure out how to attach the throttle control to both governor and sprrd control.


#4

EngineMan

EngineMan

Find this in the manual.

Attachments


  • throttle links.bmp
    1.2 MB · Views: 11


#5

R

RJH

Engine man,
Thanks very much. That is the best diagram I have see yet and is very helpful.


Top