Home

Export thread

Tecumseh Part Number Needed

Jan 12, 2014#1

davbell22602

HMSK85-155901A
247.888500

Anybody know the part number for the long screw that holds the black box on the engine shroud? Its attached to the starter by cord. It has the 3 prong plug and a button on it. Had no luck with engine IPL, equipment IPL, and starter IPL.

Jan 12, 2014#2

wjjones

davbell22602 said:
HMSK85-155901A
247.888500

Anybody know the part number for the long screw that holds the black box on the engine shroud? Its attached to the starter by cord. It has the 3 prong plug and a button on it. Had no luck with engine IPL, equipment IPL, and starter IPL.

Can you get a picture of the engine where it goes?

Jan 12, 2014#3

R

Rivets

Go to your local small engine repair shop, they should have some of those laying around. Don't really know if there is a part number.

Jan 12, 2014#4

wjjones

Rivets said:
Go to your local small engine repair shop, they should have some of those laying around. Don't really know if there is a part number.

Yep that would be the best bet. Good advice Mr. Rivets.

Jan 12, 2014#5

Fish

davbell22602 said:
HMSK85-155901A
247.888500

Anybody know the part number for the long screw that holds the black box on the engine shroud? Its attached to the starter by cord. It has the 3 prong plug and a button on it. Had no luck with engine IPL, equipment IPL, and starter IPL.

Is this it?

Tec #650819 6/32 x 2 1/2

Jan 12, 2014#6

davbell22602

Fish said:
Is this it?

Tec #650819 6/32 x 2 1/2

I need number 26 in the diagram.

Jan 12, 2014#7

Fish

Well, there you go....

Jan 12, 2014#8

davbell22602

Fish said:
Well, there you go....

Thank you. This is the 2nd part I came across that Tecumseh left off on a IPL?

Jan 12, 2014#9

Fish

davbell22602 said:
Thank you. This is the 2nd part I came across that Tecumseh left off on a IPL?

Yeah, they have always been complicated...

Jan 12, 2014#10

davbell22602

Fish said:
Yeah, they have always been complicated...

Yea I know. On some models I seen 3 different versions of the IPL. IPL in the equipment manual, Tecumseh IPL with no carb parts IPL, and before jacks small engine updated his site I used see the Tecumseh IPL with carb parts IPL.

The first one is the oval shaped air filter cover for the LEV120 engines.

Jan 14, 2014#11

wjjones

davbell22602 said:
Yea I know. On some models I seen 3 different versions of the IPL. IPL in the equipment manual, Tecumseh IPL with no carb parts IPL, and before jacks small engine updated his site I used see the Tecumseh IPL with carb parts IPL.

The first one is the oval shaped air filter cover for the LEV120 engines.

It kinda looks like a small cap screw with an alan head.

Jan 14, 2014#12

davbell22602

wjjones said:
It kinda looks like a small cap screw with an alan head.

If its the allen head then they changed it from a phillips head. I have one here for it thats the phillips head. I found local hardware stores cant match up some of the specialty nuts, bolts, screws, etc. on lawn equipment. So I just buy 3-6 of whatever it is or whatever parts supplier has on hand at the time. Not worth the gas to drive to 3-4 hardware stores to come home empty handed. Plus Fastenal makes ya buy whole buy bag if its unopened bag.

Jan 15, 2014#13

wjjones

davbell22602 said:
If its the allen head then they changed it from a phillips head. I have one here for it thats the phillips head. I found local hardware stores cant match up some of the specialty nuts, bolts, screws, etc. on lawn equipment. So I just buy 3-6 of whatever it is or whatever parts supplier has on hand at the time. Not worth the gas to drive to 3-4 hardware stores to come home empty handed. Plus Fastenal makes ya buy whole buy bag if its unopened bag.

Yep TSC should have one to match in the Hillman bolt, screws, etc section.

Home

Export thread

Tecumseh Part Number Needed

Attachments

Footer Links 1

Footer Links 2