Export thread

I've got a Briggs 407777 0124 e1 I am putting in my cub rider.
Need to know what the 2 sets of wires coming out of the Briggs are so I can figure where to land them. One is red black. The other is black white. Thanx matt.

Hello Hawkshoe!

Here is an illustrated parts list for the 407777 0124 E1 mode, http://bsintek.basco.com/BriggsDocumentDisplay/18jvBJXNnfBhU7y.pdf. Please let us know if you have additional questions. We're happy to help. Feel free to reach out on Twitter (@BriggsStratton), too!

-Team Briggs

Thank you for the info. I need to know what each wire does so I know where to connect them to my harness. I know one black comes from both coils so I am assuming that gets hooked up to the solenoid to charge the battery?? Not sure what to do with the others. Thank you.

Not a problem! Here is a link to our wiring diagrams and FAQ:

Electrical Schematics & Wiring Diagram | Small Engine Specs | Briggs & Stratton FAQ

That should be all the info you need to hook up your new Briggs & Stratton! Rev on!

-Team Briggs

This should do it. Thank you!!!!

You're very welcome! Please let us know if you need anything else. We're very active on Facebook & Twitter and are always happy to help.

-Team Briggs

I must be in over my head. I am rewiring this tractor and need to know where to land these wires coming out of the motor. Which one do I attach to the solenoid so the battery will recharge? Which is the fuel solenoid wire and where do I land it.
Thanx again!