Stx 38 won't start

Mbjorklund

Forum Newbie
Joined
May 8, 2017
Threads
1
Messages
1
Hello. My stx 38 was running fine then stopped. Won't start. Here is what I have done
Replaced timing key
Rebuilt carb
I have compression and spark.
Won't turn over at all with starter fluid or gas into cylinder head
Fresh gas. I now have fuel in oil so I'll have to change that again
I'm out of ideas and don't want to buy a new one. Any suggestions on next step? Thank you!
 

NorthBama

Well-Known Member
Joined
May 28, 2014
Threads
9
Messages
936
if you have fuel in the oil the carburetor float is not shutting of the fuel and your engine is flooding with fuel.
 
Top