Export thread

stihl trimmer fs80-r string not comming out when I tap it

#1

S

slash5bmw

I just bought a used stihl fs80-r trimmer.
It starts and runs great but I'm unable to get the string to come out when I tap it on the ground.

I've attached a picture of the bottom of the trimmer. It looks worn but I'm not sure if the entire spool needs to be replaced.

If a need a new part, does it need to be made by stihl?

Any suggestions?

Thanks.

slash

Attachments





#2

M

Mad Mackie

Got to your local Stihl dealer and buy buy a new head assembly. I've never seen a trimmer head in this bad of condition. I personally would never purchase used equipment from anyone who abused it as the previous owner did with this trimmer.:mad::thumbdown:
Mad Mackie in CT


#3

djdicetn

djdicetn

slash5bmw said:
I just bought a used stihl fs80-r trimmer.
It starts and runs great but I'm unable to get the string to come out when I tap it on the ground.

I've attached a picture of the bottom of the trimmer. It looks worn but I'm not sure if the entire spool needs to be replaced.

If a need a new part, does it need to be made by stihl?

Any suggestions?

Thanks.

slash
Click to expand...

On some brands you can simply replace the 'bump knob". Refer to the user manual and/or check with your Stihl dealer.


#4

O

osborjr

I think they are designed to wear out quick, I have 2 Stihl FS80s, both have to have complete new heads, bump knob wears down until you can't get enough bump to engage release
I think new Heads cost $55 each


#5

HarryHarley

HarryHarley

Most of the trimmers problems are in the strings. I got rid of all of that are put on a Pivotrim.
Best thing I did for the trimmer!!
Plus it costs less than a new head assembly.
Good luck

Attachments







#6

HarryHarley

HarryHarley

By the way, check this out
Does It Work: Pivotrim | WREG.com


Footer Links 1

Top