Export thread

steering lgtx 1050

#1

S

steelsmith

when mowing the steering clunks and skips gears. I put a new gear on the steering rod and the hex washer seemed fine. it didn't help could there be a bent tierod or something else? when it happens the steering seems to be binding preventing smooth meshing or gears.


#2

NorthBama

NorthBama

check the bushings above the sector gear


#3

S

steelsmith

NorthBama said:
check the bushings above the sector gear
Click to expand...
is that the gear that works with gear on steering shaft?


#4

S

steelsmith

steelsmith said:
when mowing the steering clunks and skips gears. I put a new gear on the steering rod and the hex washer seemed fine. it didn't help could there be a bent tierod or something else? when it happens the steering seems to be binding preventing smooth meshing or gears.
Click to expand...

It was the bracket plate where the hex screw holds the steering gear. the hole was worn and no longer round. had to replce the bracket plate and hex screw.


#5

NorthBama

NorthBama

thanks for the update it will help someone in the future


Footer Links 1

Top