Export thread

i may have a lead on some used 2 cycle lawn boy mower parts. if any of you are having problems finding an item, let me know and i will check my resources.

lawnboywillneverdie said:

i may have a lead on some used 2 cycle lawn boy mower parts. if any of you are having problems finding an item, let me know and i will check my resources.

Click to expand...

ps i got 2 of my mowers from this guy and hes great and has good prices. has alot of different models and many are the solid state style lawn boys too.:licking:
lots of nice decks.

p.s. the 2 i got all i did was wash them drain the fuel and filled em up and wham they ran like new.

i have a salvage guy and he asks $20 for a deck no matter what and $40 for a whole mower. BTW some actually will run straight from the salvage yard my 2 rescues ran without a rhythmic purr after given fresh gas so if you want to know where this mower shop is ill let you know. he has nos parts for practically any lawnboy and is at a reasonable price too up here in Ohio. reply in thread for his address it's called Gary's Mower shop

lawnboywillneverdie said:

i have a salvage guy and he asks $20 for a deck no matter what and $40 for a whole mower. BTW some actually will run straight from the salvage yard my 2 rescues ran without a rhythmic purr after given fresh gas so if you want to know where this mower shop is ill let you know. he has nos parts for practically any lawnboy and is at a reasonable price too up here in Ohio. reply in thread for his address it's called Gary's Mower shop

Click to expand...

Contact info for this guy please. I am resurrecting an old Lawn Boy with AL deck, electric start, and self propel and need parts. Cheaper the better, and would rather get them from someone knowledgeable than my local dealer who apparently has a hard time finding the right part when I give him the part number from my manual.

I'm looking for a complete SP drive assembly for a 10515
With motor drive pulley if possible..

I am looking for a grass bag for a gold Pro rear bagger/ combonation MN-10552
Cant seem to find one on line.

How about Gary's slightly scrambled ph #:smile:

I need contact info for this guy ASAP please, or for a good online source for parts. The Lawn Boy store does not list the correct part number for my pinion gear(the plastic one that always wears out) and I need a bunch of other parts too. I really wanna get this mower running so I can sell the steel deck lawn boy I have and thin my herd.

lawnboywillneverdie said:

i may have a lead on some used 2 cycle lawn boy mower parts. if any of you are having problems finding an item, let me know and i will check my resources.

Click to expand...

Hello. I've been unable to find a part. It would be great if you can help. Below is the text about it from my latest post on the forum, dated today (May 20, 2015), 5:44pm. Thanks from Gene123 on the forum!

==============================================

Re: Seeking Lawn Boy model 5247 carb throttle control lever (obsolete?)

Thank you, gentlemen, for your responses. They all helped. I'm finding out Lawn Boys can be confusing.

I finally stumbled on a site which shows Lawn Boy used three carbs on the F100 engine. No wonder local shops were having a hard time figuring it out. The site is https://lookup3.toro.com/ttcGateway/...als/lball.html. Page 4-34 titled "F Series Carburetor Identification" shows the three carbs. The speed control lever I need looks like the one in the middle picture. Page 4-51 deals with the governor, but it has the best picture of my carb and the speed control lever I need. I'd post an actual pic of mine, but I can't get one.

I can't find the part number for for the speed control lever I need. The suggested speed control lever number 609631 is close, but it looks like that one is for the "early model" carb. My carb appears to be a "later model." My mower is model 5247, serial number 9510868, F100 engine.

Do any of you fellows know the part number for the speed control lever for my carb? Can you direct me to a source for one? This has myself and two local shops stumped. An old Lawn Boy dealer told me it's an obsolete part, and they don't know where to locate one.

Thanks, again, to everyone for helpful responses.

#610832

OP,

still awaiting info on this magical shop of yours.

everyone else,

I ordered a bunch of parts from parts tree last week, and now am being told that something is on backorder. Don't know which one(s). If anyone can help me find a source for parts for this old mower that would be great. My model number is 8237, built 1978, with the electric/manual starter.

I had to wait two weeks for a large order of parts from parts tree this month.
It's mower tune up season
I had three dozen parts for my Lawnboy and old Snapper RER

rarebear said:

I had to wait two weeks for a large order of parts from parts tree this month.
It's mower tune up season
I had three dozen parts for my Lawnboy and old Snapper RER

Click to expand...

I ordered 6 parts....

lawnboywillneverdie said:

i have a salvage guy and he asks $20 for a deck no matter what and $40 for a whole mower. BTW some actually will run straight from the salvage yard my 2 rescues ran without a rhythmic purr after given fresh gas so if you want to know where this mower shop is ill let you know. he has nos parts for practically any lawnboy and is at a reasonable price too up here in Ohio. reply in thread for his address it's called Gary's Mower shop

Click to expand...

What is this guy's address and contact info?Phone,email?Looking for new OEM,complete piston/ring set for F series without breaking the bank.Thanks

b67nva said:

What is this guy's address and contact info?Phone,email?Looking for new OEM,complete piston/ring set for F series without breaking the bank.Thanks

Click to expand...

Bringing this back from the dead as I would like to know too...