Export thread

Solved: grass was not getting into the bags!!!!!!!!!!!!!!!!!!!!!!!!

#1

4audiq

4audiq

Last summer, my grass was not getting into the double bags. It would clog up at the mouth
of the grass tubes.
Just last Friday, I cleaned out both tubes with a wire brush and then wiped them out with
paint thinner.
I then used Glyptal on a small microfiber pad I had and coated the inside of both tubes.
That was Friday (3/21/2014), Today (3/24/2014) I mowed the entire lawn and it worked
beautifully! Gyptal is used to coat electricaL windings. ALL the grass went into the bags.
When I was done mowing, not a blade of grass was inside either tube.
It is called Glyptal 1201 Red Enamel (Insulating Paint).
You can get it cheapest here:
Glyptal 1201 Red Enamel Paint Low Voc - Quart - MIL-E-22118 at SkyGeek.com


#2

wjjones

wjjones

Last summer, my grass was not getting into the double bags. It would clog up at the mouth
of the grass tubes.
Just last Friday, I cleaned out both tubes with a wire brush and then wiped them out with
paint thinner.
I then used Glyptal on a small microfiber pad I had and coated the inside of both tubes.
That was Friday (3/21/2014), Today (3/24/2014) I mowed the entire lawn and it worked
beautifully! Gyptal is used to coat electricaL windings. ALL the grass went into the bags.
When I was done mowing, not a blade of grass was inside either tube.
It is called Glyptal 1201 Red Enamel (Insulating Paint).
You can get it cheapest here:
Glyptal 1201 Red Enamel Paint Low Voc - Quart - MIL-E-22118 at SkyGeek.com



Thank you for the tip.


Top