I have a YTH24V54 that I need a service manual for.: I can’t seem to find any fuses..
The starter is completely dead.. no click or anything.. I disconnected the starter wire and used my power probe to test the starter.. it blows the circuit breaker on my power probe everytime.. I suppose the starter is shorted to ground but I have no voltage to the starter from the solenoid.. I plan to test the solenoid today but I’d like to check the fuses and such first..
The motor is a Briggs Intek 2 cyclinder 24hp
#2
StarTech
per operator manual it is located inside the operator tower. Probably on the right side.
