Bought a used SCAG TT back at the first of the year. Haven't been happy with the way it cuts. So I checked for level and it was out of level. Got it level and cut the grass, it cut better but still not what I wanted. Started taking the pulleys off the spindles to check for possible problems and notice that the spindle on the left hand side was not plum. The spindle angled back about 3/8" from being vertical. I took the spindle off and set it on a work bench and it sits vertically. Looking at the deck where it was mounted and the deck was bent. The area in front of the spindle was raised up and the area behind the spindle was bent down. Any suggestions on how to level the area back?
falconerone
