Export thread

Ryobi PBV-30

#1

A

Andysp

Hi,I have one of these and was looking for a replacement carburetor it is hard to start but runs well when started.It has a Zama 13 carb.I looked up ebay to find a replacement but can't seem to get the exact one.Any advice would be great.

Attachments







#2

I

ILENGINE

Part of the part number of the carb will be molded into the carb body down in the area where the mounting stud slides through. Something like C1Q,or C1U or.C1S and the rest will be printed on the side of the carb toward one corner, should start with a letter then have some numbers after it.


#3

A

Andysp

ILENGINE said:
Part of the part number of the carb will be molded into the carb body down in the area where the mounting stud slides through. Something like C1Q,or C1U or.C1S and the rest will be printed on the side of the carb toward one corner, should start with a letter then have some numbers after it.
Click to expand...
Thanks for the reply.There is a number there 131 H.Still can't get a exact match online.


Footer Links 1

Top