You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
#1
J
jerrypepe
I had to replace the governor gear, runs well now but I cannot find the required torque specs for the 4 bolts that attach the engine to the frame
thanks
Jerry
#2
Fish
Smurf em' down tight!!!
I don't think I have ever seen torque specs for those!!
#3
Scrubcadet10
Nothing tighter than stripped!!! :laughing:
Just get them as snug as you can, and if you want, check them every so often to be sure they're still hanging on.
#4
Boobala
I had to replace the governor gear, runs well now but I cannot find the required torque specs for the 4 bolts that attach the engine to the frame
thanks
Jerry
I just tighten em down, to 2 grunt's and a healthy fart .. :laughing:..:laughing:
#5
Fish
I had this one kid in the shop, that was a over-torquing nutball, he gave me my first gray hairs....
#6
Scrubcadet10
I just tighten em down, to 2 grunt's and a healthy fart .. :laughing:..:laughing:
Hmmm, a Fart Type Torque wrench............. I LIKE IT! :laughing:
