Export thread

Just bought this used mower and cleaned the carburetor. It is still pumping gas into cc.
Needle tip looked ok. Does it need a new one? Thanks

Could be the needle, or a hole in the float.
Does it have a fuel pump?
Also post the model number. It will be stamped on the valve cover.

There isn't the usual id tag
Supposed to be 2 years old.
One person put new seal kit in and it stopped.

ba_50 said:

There isn't the usual id tag
Supposed to be 2 years old.
One person put new seal kit in and it stopped.

Click to expand...

The model number will be stamped on the valve cover. sometimes on the top of it, sometimes on the side.

Model 31p977
The float doesn't leak but with some force the needle let's air through whether upside down or right side up. Must be the needle or a burr