Export thread

Press pedal light stays on

#1

O

Old Yellow

Good afternoon all,

I am looking for repair advice for my cub cadet 1750 Hydo with a Kholer17 engine. I just purchased and I downloaded the manual and it states it won't start if the Press Pedal light is on. I started with the normal stuff has good spark, no fuel is coming out of the fuel pump, which I thought I needed to replace so I did some research and it also stated it would not start if the light is on. I have looked to see if the mower has a brake microchip to disengage the safety feature. Thanks all

Old Yellow!


#2

Boobala

Boobala

Old Yellow said:
Good afternoon all,

I am looking for repair advice for my cub cadet 1750 Hydo with a Kholer17 engine. I just purchased and I downloaded the manual and it states it won't start if the Press Pedal light is on. I started with the normal stuff has good spark, no fuel is coming out of the fuel pump, which I thought I needed to replace so I did some research and it also stated it would not start if the light is on. I have looked to see if the mower has a brake microchip to disengage the safety feature. Thanks all

Old Yellow!
Click to expand...

IF you just purchased the machine ... you should be covered under your warranty ..!!


#3

O

Old Yellow

Boobala said:
IF you just purchased the machine ... you should be covered under your warranty ..!!
Click to expand...

It is a used mower and I knew it was going to take a some work. Want to do this project with my 13 yr old son to start him working on small motors and spend some time together. Thanks for the advice.


#4

I

ILENGINE

Just went through the same thing on my BIL's SLT1554 Had to replace 2 of the 4 wire connectors on the brake safety switch due to corrosion.


#5

O

Old Yellow

ILENGINE said:
Just went through the same thing on my BIL's SLT1554 Had to replace 2 of the 4 wire connectors on the brake safety switch due to corrosion.
Click to expand...

Thank you so much! I will check tomorrow let you know!


Footer Links 1

Top