I changes the fuel lines on my weed trimmer and clean out carb, when i put back together i primed it and it started and stalled, when i went to check air filter it was soaked with gas? And now itcwont start? Did i ruined this weed trimmer? Please advise thank you.
You didn't get the fuel lines reversed on the primer bulb did you. If you reverse them it can cause the symptom that you describe. They need to be set up to pull gas through the carb, into the primer, and then back to the fuel tank. If you push fuel into the carb with the primer it will cause overflow of the carb, leading to an internal fuel leak in the carb.
