Mower deck Paint Aluminum Deck

H

Hoov

Forum Newbie
What is the best way to prepare the aluminum deck on the left side to be able to touch up the paint. It's a little nicked up from bumping into landscape bricks. Model 10515
 
I've used Tamiya TS-22 light green available at a hobby shop. Comes in a small spray can. It's not an exact match to Lawn-Boy green, but it's close and will look better than before. Just feather the damaged area with a sanding disk on your drill, prime with light grey primer. I've just refinished a Toro deck, but removed everything. I used an automotive spray gun and N.A.P.A. acrylic enamel with hardener. Came out really well.

Jeff
 
jp1961 said:
I've used Tamiya TS-22 light green available at a hobby shop. Comes in a small spray can. It's not an exact match to Lawn-Boy green, but it's close and will look better than before. Just feather the damaged area with a sanding disk on your drill, prime with light grey primer. I've just refinished a Toro deck, but removed everything. I used an automotive spray gun and N.A.P.A. acrylic enamel with hardener. Came out really well.

Jeff
Click to expand...

Thanks for your help-Hoov
 
The standard repaint is Hi-Temp engine enamel "Grabber Green" color. Available in most chain auto parts stores. You need this type of paint to resist gas spills.
 
Hand sanding it with sandpaper will work, something around 120 grit. A sanding disc on your drill (available at HomeDepot) is a better option. Feather the damaged area into the undamaged area, then prime, then paint with color. Tape off the area you don't want painted with old newspaper.


Jeff
 
You must log in or register to reply here.
Back
Top