tgenereaux
Forum Newbie
- Joined
- Dec 4, 2019
- Threads
- 1
- Messages
- 1
Hi Everyone
so I just went out the other night to start my Lawn Tractor (Regent) and dead battery, jump-started fine I install my 48' Snowblower and no power when I pull the PTO switch No headlight and no chute movement.
I tested the battery with the engine not running and 0 volts so I jumped started it and when running at low idle 6.6 v & at high idle 7.7v and still no power I am guessing I have a charging problem as I think it should be charging at 12v at high idle.
any idea would be great before I unmount the blower and take it in the shop.
thanks in advance
Terry
so I just went out the other night to start my Lawn Tractor (Regent) and dead battery, jump-started fine I install my 48' Snowblower and no power when I pull the PTO switch No headlight and no chute movement.
I tested the battery with the engine not running and 0 volts so I jumped started it and when running at low idle 6.6 v & at high idle 7.7v and still no power I am guessing I have a charging problem as I think it should be charging at 12v at high idle.
any idea would be great before I unmount the blower and take it in the shop.
thanks in advance
Terry