ThatOneGuy1968
Member
- Joined
- Oct 3, 2023
- Threads
- 10
- Messages
- 37
Working on a Husqvarna 22v46, no crank condition..
The starter test bad to ground, I put my power probe on the starter and it pops my probes breaker..
The solenoid tested bad also..
Well I forgot to check for voltage on the two little wires so I put it back together and I have no voltage with the switch in the crank position on neither the switch wire or the coil wire to the solenoid
What Says You..
Cowboy..
The starter test bad to ground, I put my power probe on the starter and it pops my probes breaker..
The solenoid tested bad also..
Well I forgot to check for voltage on the two little wires so I put it back together and I have no voltage with the switch in the crank position on neither the switch wire or the coil wire to the solenoid
What Says You..
Cowboy..