hurst1979olds
Active Member
- Joined
- Apr 16, 2012
- Threads
- 17
- Messages
- 79
I just joined this forum. I already did an introduction on the Cub Cadet section but figured I'd do it here as well. We'll I just bought a new LTX1045 Cub Cadet. Picked it up yesterday. The mower that is replacing was a Murray 18.5 vtwin 46" cut, which I had a snow blower attachment for as well. I couldnt keep drive belts on it always burnt up on my hills. Will be listing on CL soon.
I also have a John Deere JS65 push mower. Its the one with castor front wheels. Someone had it in the garbage. All it needed was a carb rebuild(full of water), a new plug and a air filter housing and it runs great.
Ever since I was 9 I started mowing neighbors lawns. I always used Snapper push mowers with either a 3.5 or 5hp Briggs on them. Every one was pulled out of the garbage and I usually fixed most myself with my dad teaching me. I'll always remember those days.
I was skimming through the forum and it seems like alot of good guys on here with a wealth of knowledge. I hope I can be of assist as well.
I also have a John Deere JS65 push mower. Its the one with castor front wheels. Someone had it in the garbage. All it needed was a carb rebuild(full of water), a new plug and a air filter housing and it runs great.
Ever since I was 9 I started mowing neighbors lawns. I always used Snapper push mowers with either a 3.5 or 5hp Briggs on them. Every one was pulled out of the garbage and I usually fixed most myself with my dad teaching me. I'll always remember those days.
I was skimming through the forum and it seems like alot of good guys on here with a wealth of knowledge. I hope I can be of assist as well.
