I took the carb. apart and used carb, cleaner to flush things out and small wire to run thru small passages. Still runs at lower rpm's and won't rev up & still lopes while it runs.
Sprayed carb. cleaner around carb. base gaskets and it didn't affect anything, but when sprayed in between carb and crank seal it slows down and if continue to spray it kills it. Plug is black rich looking. Always thought if crank seal was bad it would run lean. Tried shutting off gas and when it's running out it will start to pop while running.
sorry for the long rant, but it's got me stumped
Thanks