Export thread

Looking for help to find a reciole spring on eBay for my homelight hb25150 leafblower

#1

Johnathan walters

Johnathan walters

the stock one is the first to pictures the end is broke I bought one I looked it up it replacement parts Sayed it it was right but the little head sticking out of the case was smaller than the stock head and it would kick the spring I been looking for the stock but I been getting confused because the head sizes the last to pictures will be the one I bought plz help thanks IMG_20210128_034356.jpgIMG_20210128_015729.jpg

Attachments







#2

Johnathan walters

Johnathan walters

Sorry the clean reciole is the one I bought the dirty one is stock


#3

cpurvis

cpurvis

Spelling means everything to search engines.

Spell it like this--homelite hb25150 recoil spring--and see what turns up.


#4

Johnathan walters

Johnathan walters

Ok thanks


#5

StarTech

StarTech

Spring looks right but please post the UT number of the blower so we double check.


#6

Johnathan walters

Johnathan walters

UT-08034-R the stock spring head is bigger the one I bought is smaller and it kicks the spring out of the case I'm trying to look for the stock one


#7

Johnathan walters

Johnathan walters

StarTech said:
Spring looks right but please post the UT number of the blower so we double check.
Click to expand...
UT-08034-R the stock spring head is bigger the one I bought is smaller and it kicks the spring out of the case I'm trying to look for the stock one


#8

ILENGINE

ILENGINE

Need part number 638033001 for the spring and container.


#9

Johnathan walters

Johnathan walters

ILENGINE said:
Need part number 638033001 for the spring and container.
Click to expand...
That's the new one and it's the rong size


#10

StarTech

StarTech

And probably need a new starter pulley too. PN 98770A as both of the original parts have been superseded.


#11

Johnathan walters

Johnathan walters

I just looked up these two tell me which one is close to my stock one NOS HOMELITE 180 190 192 200 240 250 Chainsaw Recoil Starter Spring A97908 and Homelite 308066001 Spring & Container Assembly
Part#: 308066001

Attachments









#12

Johnathan walters

Johnathan walters

StarTech said:
And probably need a new starter pulley too. PN 98770A as both of the original parts have been superseded.
Click to expand...
I don't know if u could tell me but my stock one before it brock it would kickback out of the case and not rewind it it hasn't done that before and when I would rewind with my hand it would click 2 times and it never do it maybey would the spring be wore out or my pully because I put the new one in it is a small head and it does the same thing but 10 times worse so I know for a fact the new is the rong size if u could help me find the right recoile I pictured is the dirty one that would be helpful thanks

Attachments







#13

StarTech

StarTech

All we can go by is the published IPLs for your UT-08034-R. The original PN for the recoil spring and retainer was UP03917 which was superseded to A98773A and finally the latest supersede is PN 638033001.

Also make sure you are winding in the correct direction.


#14

Johnathan walters

Johnathan walters

StarTech said:
All we can go by is the published IPLs for your UT-08034-R. The original PN for the recoil spring and retainer was UP03917 which was superseded to A98773A and finally the latest supersede is PN 638033001.

Also make sure you are winding in the correct direction.
Click to expand...
Ok thank u for ure time I ordered the recoile ure talking bout I think it's my pully so I will go from there


#15

ILENGINE

ILENGINE

Johnathan walters said:
I don't know if u could tell me but my stock one before it brock it would kickback out of the case and not rewind it it hasn't done that before and when I would rewind with my hand it would click 2 times and it never do it maybey would the spring be wore out or my pully because I put the new one in it is a small head and it does the same thing but 10 times worse so I know for a fact the new is the rong size if u could help me find the right recoile I pictured is the dirty one that would be helpful thanks
Click to expand...
When you say kick out of the case, are you saying that the exterior bump is hopping out of its recess area in the blower housing. Or the spring is disconnecting from the rope pulley.


#16

Johnathan walters

Johnathan walters

ILENGINE said:
When you say kick out of the case, are you saying that the exterior bump is hopping out of its recess area in the blower housing. Or the spring is disconnecting from the rope pulley.
Click to expand...
It's poping out of the blower housing and it disconnect from the pully


#17

ILENGINE

ILENGINE

When you look where the spring goes into the blower housing there is a recess area that the bump fits into. there should be a pin in the center of that recess area. Is that pin still there or has it broken off.


#18

Johnathan walters

Johnathan walters

I know part of the hole were the spring goes is chipped of but still fits


Footer Links 1

Top